Engineering Lithium Ions Embedded in NiFe Layered Double Hydroxide Lattices To Activate Laminated Ni2+ Sites as High-Efficiency Oxygen Evolution Reaction Catalysts

NiFe layered double hydroxides (LDHs) have been denoted as benchmark non-noble-metal electrocatalysts for the oxygen evolution reaction (OER). However, for laminates of NiFe LDHs, the edge sites are active, but the basal plane is inert, leading to underutilization as catalysts for the OER. Herein, for the first time, light and electron-deficient Li ions are intercalated into the basal plane of NiFe LDHs. The results of theoretical calculations and experiments both showed that electrons would be transferred from near Ni²⁺ to the surroundings of Li⁺, resulting in electron-deficient properties of the Ni sites, which would function as “electron-hungry” sites, to enhance surface adsorption of electron-rich oxygen-containing groups, which would enhance the effective activity for the OER. As demonstrated by the catalytic performance, the Li−NiFe LDH electrodes showed an ultralow overpotential of only 298 mV at 50 mA cm⁻², which was lower than that of 347 mV for initial NiFe LDHs and lower than that of 373 mV for RuO₂. Reasonable intercalation adjustment effectively activates laminated Ni²⁺ sites and constructs the electron-deficient structure to enhance its electrocatalytic activity, which sheds light on the functional treatment of catalytic materials.     

Reactivity of Diarylnitrenium Ions

Hydride abstraction from diarylamines with the trityl ion is explored in an attempt to generate a stable diarylnitrenium ion, Ar₂N⁺. Sequential H-atom abstraction reactions ensue. The first H-atom abstraction leads to intensely colored aminium radical cations, Ar₂NH^.+, some of which are quite stable. However, most undergo a second H-atom abstraction leading to ammonium ions, Ar₂NH₂⁺. In the absence of a ready source of H-atoms, a unique self-abstraction reaction occurs when Ar=Me₅C₆, leading to a novel iminium radical cation, Ar=N^.+Ar, which decays via a second self H-atom abstraction reaction to give a stable iminium ion, Ar=N⁺HAr. These products differ substantially from those derived via photochemically produced diarylnitrenium ions.     

Boosting Conjugate Addition to Nitroolefins Using Lithium Tetraorganozincates: Synthetic Strategies and Structural Insights

We report the first transition metal catalyst- and ligand-free conjugate addition of lithium tetraorganozincates (R₄ZnLi₂) to nitroolefins. Displaying enhanced nucleophilicity combined with unique chemoselectivity and functional group tolerance, homoleptic aliphatic and aromatic R₄ZnLi₂ provide access to valuable nitroalkanes in up to 98 % yield under mild conditions (0 °C) and short reaction time (30 min). This is particularly remarkable when employing β-nitroacrylates and β-nitroenones, where despite the presence of other electrophilic groups, selective 1,4 addition to the C=C is preferred. Structural and spectroscopic studies confirmed the formation of tetraorganozincate species in solution, the nature of which has been a long debated issue, and allowed to unveil the key role played by donor additives on the aggregation and structure of these reagents. Thus, while chelating N,N,N’,N’-tetramethylethylenediamine (TMEDA) and (R,R)-N,N,N’,N’-tetramethyl-1,2-diaminocyclohexane (TMCDA) favour the formation of contacted-ion pair zincates, macrocyclic Lewis donor 12-crown-4 triggers an immediate disproportionation process of Et₄ZnLi₂ into equimolar amounts of solvent-separated Et₃ZnLi and EtLi.     

Solution-Based,Anion-Doping of Li4Ti5O12 Nanoflowers for Lithium-Ion Battery Applications

Solution-based, anionic doping represents a convenient strategy with which to improve upon the conductivity of candidate anode materials such as Li₄Ti₅O₁₂ (LTO). As such, novel synthetic hydrothermally-inspired protocols have primarily been devised herein, aimed at the large-scale production of unique halogen-doped, micron-scale, three-dimensional, hierarchical LTO flower-like motifs. Although fluorine (F) doping has been explored, the use of chlorine (Cl) dopants is the primary focus here. Several experimental variables, such as dopant amount, lithium hydroxide concentration, and titanium butoxide purity, were probed and perfected. Furthermore, the Cl doping process did not damage the intrinsic LTO morphology. The analysis, based on interpreting a compilation of SEM, XRD, XPS, and TEM-EDS results, was used to determine an optimized dopant concentration of Cl. Electrochemical tests demonstrated an increased capacity via cycling of 12 % for a Cl-doped sample as compared with pristine LTO. Moreover, the Cl-doped LTO sample described in this study exhibited the highest discharge capacity yet reported at an observed rate of 2C for this material at 143mAh g⁻¹. Overall, these data suggest that the Cl dopant likely enhances not only the ion transport capabilities, but also the overall electrical conductivity of our as-prepared structures. To help explain these favorable findings, theoretical DFT calculations were used to postulate that the electronic conductivity and Li diffusion were likely improved by the presence of increased Ti³⁺ ion concentration coupled with widening of the Li migration channel.     

介孔碳材料抑制锂电池负极枝晶生长

为了解决锂电池负极表面锂枝晶生长带来的性能衰退和安全问题。 以沸石咪唑酯骨架-8(ZIF-8)为前驱体制得介孔碳材料(MCM),用于金属锂负极表面改性。 X射线粉末衍射(XRD)和拉曼光谱表明,退火制得的MCM具有一定的石墨化程度,N₂气吸脱附测试(BET)证明MCM具有典型的介孔特征。 对比不同温度退火样品的XRD、拉曼光谱和BET测试结果,确定900 ℃为最佳退火温度。 优化的MCM作为表面改性剂对金属锂负极进行改性研究。 电池充放电循环后,负极样品的XRD和扫描电子显微镜(SEM)测试表明,MCM能够通过均衡锂负极表面的电荷分布抑制金属锂的取向沉积和锂枝晶的生长。 本研究为制备抑制锂电池负极枝晶生长表面改性剂提供了一种简便而有效的合成方法,有利于锂电池循环寿命的延长和安全性能的提高。     

基于有序介孔碳的氯离子选择性电极的制备及其在手持传感系统中的应用

以有序介孔碳(OMC)球为离子-电子转换层,制备了固态氯离子选择性电极,构建了基于离子敏感的场效应晶体管(ISFET)的手持式传感系统,用于检测人体血清中的氯离子。优化了OMC前驱体的碳化温度,探究了OMC形貌结构对电极传感性能的影响;电极柔性化制备后考察了其在手持系统中对氯离子的检测效果。结果表明,最优条件下,电极在5.12×10^-4~1.02 mol/L的浓度范围呈现线性响应,响应斜率为60 mV/decade。该柔性电极在手持传感系统中展现出高灵敏度和重现性,可用于人体血清样品中氯离子的检测,其回收率为96.3%~104.9%。     

铜铁镁三掺铌酸锂晶体的第一性原理研究

利用基于密度泛函理论的第一性原理,研究了Cu:Fe:Mg:LiNbO3晶体及对比组的电子结构和光学特性.研究显示,单掺铜或铁铌酸锂晶体的杂质能级分别由Cu 3d轨道或Fe 3d轨道贡献,禁带宽度分别为3.45和3.42 eV;铜、铁共掺铌酸锂晶体杂质能级由Cu和Fe的3d轨道共同贡献,禁带宽度为3.24 eV,吸收峰分别在3.01,2.53和1.36 eV处;Cu:Fe:Mg:LiNbO3晶体中Mg^2+浓度低于阈值或高于阈值(阈值约为6.0 mol%)的禁带宽度分别为2.89 eV或3.30 eV,吸收峰分别位于2.45 eV,1.89 eV或2.89 eV,2.59 eV,2.24 eV.Mg^2+浓度高于阈值,会使吸收边较低于阈值情况红移;并使得部分Fe^3+占Nb位,引起晶体场改变,从而改变吸收峰位置和强度.双光存储应用中可选取2.9 eV作为擦除光,2.5 eV作为读取和写入光,选取Mg^2+浓度达到阈值的三掺晶体在增加动态范围和灵敏度等参量以及优化再现图像的质量等方面更具优势.     

Nucleon effective mass splitting and density-dependent symmetry energy effects on elliptic flow in heavy ion collisions at E_(lab)= 0.09 ～ 1.5 GeV/nucleon

By incorporating an iso spin-dependent form of the momentum-dependent potential in the ultra-relativistic quantum molecular dynamics(UrQMD) model,we systematically investigate effects of the neutron-proton effective mass splitting m*_(n-p)=m*_n-m*_p/m and the density-dependent nuclear symmetry energy E_(sym)(ρ) on the elliptic flow v_2 in~(197)Au+~(197) Au collisions at beam energies from 0.09 to 1.5 GeV/nucleon.It is found that at higher beam energies(≥0.25 GeV/nucleon) with the approximately 75 MeV difference in slopes of the two different E_(sym)(ρ),and the variation of m*_(n-p) ranging from-0.03 to 0.03 at saturation density with isospin asymmetry δ=(ρ_n-ρ_p)/ρ-0.2,the E_(sym)(ρ) has a stronger influence on the difference in v_2 between neutrons and protons,i.e.,v_2~n-v_2~p,than m*_(n-p) has.Meanwhile,at lower beam energies(≤0.25 GeV/nucleon),v_2~n-v_2~p is sensitive to both the E_(sym)(ρ) and the m*_(n-p).Moreover,the influence of m*_(n-p) on v_2~n-v_2~p is more evident with the parameters of this study when using the soft,rather than stiff,symmetry energy.     

Assessing the Importance of Cation Size in the Tetragonal-Cubic Phase Transition in Lithium-Garnet Electrolytes**

Lithium garnets are promising solid-state electrolytes for next-generation lithium-ion batteries. These materials have high ionic conductivity, a wide electrochemical window and stability with Li metal. However, lithium garnets have a maximum limit of seven lithium atoms per formula unit (e.g., La₃Zr₂Li₇O₁₂), before the system transitions from a cubic to a tetragonal phase with poor ionic mobility. This arises from full occupation of the Li sites. Hence, the most conductive lithium garnets have Li between 6–6.55 Li per formula unit, which maintains the cubic symmetry and the disordered Li sub-lattice. The tetragonal phase, however, forms the highly conducting cubic phase at higher temperatures, thought to arise from increased cell volume and entropic stabilisation permitting Li disorder. However, little work has been undertaken in understanding the controlling factors of this phase transition, which could enable enhanced dopant strategies to maintain room temperature cubic garnet at higher Li contents. Here, a series of nine tetragonal garnets were synthesised and analysed by variable temperature XRD to understand the dependence of site substitution on the phase transition temperature. Interestingly the octahedral site cation radius was identified as the key parameter for the transition temperature with larger or smaller dopants altering the transition temperature noticeably. A site substitution was, however, found to make little difference irrespective of significant changes to cell volume.     

Heterointerface Engineering of ZnO/CdS Heterostructures through ZnS Layers for Photocatalytic Water Splitting

Solar-driven water splitting to produce clean and renewable hydrogen offers a green strategy to address the energy crisis and environmental pollution. Heterostructure catalysts are receiving increasing attention for photocatalytic hydrogen generation. ZnO/ZnS/CdS and ZnO/CdS heterostructures have been successfully designed and prepared according to two different strategies. By introducing a heterointerface layer of ZnS between ZnO and CdS, a Z scheme charge-transfer channel was promoted and achieved superior photocatalytic performance. A highest hydrogen generation rate of 156.7 μmol g⁻¹ h⁻¹ was achieved by precise control of the thickness of the heterointerface layer and of the CdS shell. These findings demonstrated that heterostructures are promising catalysts for solar-driven water splitting, and that heterointerface engineering is an effective way to improve the photocatalytic properties of heterostructures.